KM1024MNB Printhead KM1024 14pl print head 1024 mab 14pl
print head KM MNB konica minolta printhead 1024 14pl
MNB Printhead Original Konica KM1024/14PL MNB Print Head For Printer
Original 100% and new Konica minolta MNB 1024/14pl KM1024 MNB printhead for Printing
The Konica Minolta KM1024 MN print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads. The Konica Minolta KM1024 MN print head is a vast improvement over the KM512 print head series, offering twice the print width and double the level of greyscale. Konica Minolta piezo on-demand inkjet heads are driven using lower voltages than other inkjet heads and the new actuator used in the KM1024 reduces power consumption even further. The Konica Minolta KM1024 MN print head has 1024 nozzles with a droplet size of 14 pico litre and a native resolution of 360 dpi. The print head is compatible with oil based and solvent inks. This print head is also known as the Konica Minolta KM1024 MNB. This is Konica original print head and it includes the necessary waveform information. It carries a product warranty.
Specifications :
Technology: On-Demand Piezo Electric (Shared Wall 3 Cycle) Native Resolution: 360 dpi Cal. Droplet Size: 14 pico litre Max. Drops in Greyscale: 8 drops Tot. Amount of Nozzles: 1024 (512 nozzles per line) Nozzle Spacing: 70.5 microns Print Width: 72 mm Firing Frequency: 12.8 kHz Ink Compatibility: Oil Based and Solvent Inks Heater: not integrated
79802M Thermal Printhead for Zebra ZM400 Thermal Barcode Label Printer 600dpi Original
Zebra supplies are made by Zebra, for Zebra printers, to the highest standards. Theyare all extensively tested to ensure best print quality and performance before they arebranded and introduced into the range. Tested on the printers they will be used on,in the combinations they will be used in, they are developed specifically for ourusers' requirements.
Originale Ky0cera KJ4B-0300 KJ4B-QA KJ4B-YH KJ4B testina di stampa per la stampa tessile macchina
Kyocera KJ4B-0300-G06DS-BYH1 300dpi Inkjet Printhead for Water-based Ink (two color)
This Kyocera KJ4B-0300 G type is designed for high speed single-pass applications with printers using aqueous ink. It is a 300dpi two colours printhead with a maximum drive frequency of 30kHz.
SATO R32975200 printhead thermal 203dpi S86-EX Printers
Print Head 203 dpi for SATO S86-ex Print Engine
SATO OEM Printhead R32975200 for S86-EX Printers (203 dpi)
This SATO Thermal Printhead is a powerful label printer, enabling you to produce on-demand labels with crisp, detailed text. You can print many high-quality address labels because this thermal printer has an innovative direct thermal element.
The Ricoh GEN4 MH2420 printhead is suitable for a range of aqueous, solvent and UV printers. This printhead has an integrated heater and thermistor. This is Ricoh original printhead and it is covered by a manufacturer warranty. This cable including the connector is 44 cm long. The version with short cable has been discontinued. The long cable version is used as an alternative. The printhead comes with hose barb ink inlet that can be removed in. case o-ring sealed ink inlet are required. This printhead corresponds to Ricoh part numbers N220792W, N220792S, N220792U or N220792E.